De-reverb for speech, in audio or video
AI Reverb Remover for Speech and Video
AudioCleaner removes reverb from speech with an AI reverb remover: the distant tail of a hall, a gym or a bare office goes, and the voice sounds close again. Audio or video up to 30 minutes and 400 MB, mono out. It runs on Studio voice, so sign in, see the price and try the first minute.
- Made for Speech
- Try the First Minute
- Room Sound 0 to 50%
- Video Back, Picture Kept
An interview in a stairwell
Room echo · Interview · Studio voice
Made noisy on purpose and cleaned on our partner studio, as it came out. The page lines the tracks up so you can switch while it plays.
0:00 / 0:00
Studio voice: the voice rebuilt without the room, so echo and other voices are gone too.
Brings a little of the original room back under the rebuilt voice.
Playback here is matched to it, so the comparison is fair.
Your files and results are visible only to you; runs are kept 7 days.
Up to 30 min · 400 MB
For speech, not singing or instruments · mono result
- talks, lectures, calls and videos
- Speech
- per file, up to 400 MB
- 30 min
- to try first, never charged twice
- 1 minute
- of the room back, after the run
- 0 to 50%
- MP3 or WAV at 48 kHz
- Mono
- results kept, failed runs refunded
- 7 days
What the AI Reverb Remover Does
A reverb remover online, with nothing to install, made for the spoken word and easy to check by ear.
Who Uses a Reverb Remover
Six kinds of speech that pick up a room, and come back close.
Lectures from the back of a hall
The mic hears the hall more than the teacher. Remove reverb and the words come forward.
Sermons and talks
Stone walls and high ceilings ring for seconds. Publish the talk without the echoing nave.
Webinars from a bare office
Glass, desks and empty walls make you sound distant; the dry voice is close and easy to follow.
Coaching videos in gyms
Sports halls blur every cue. A dry voice keeps the instructions clear over the picture.
Meetings in glass rooms
Hard walls push everyone back from the mic. Dry the recording for the minutes or the archive.
Voice-over drafts at home
No booth yet? De-reverb a draft read in an untreated room before deciding to record it again.
How to Remove Reverb From Audio in 3 Steps
The same steps remove reverb from a video. Sign in first; each run shows its price on the button.
- 01
Open the recording
Drop audio or a video up to 30 minutes and 400 MB: MP3, WAV, M4A, FLAC, OGG, MP4, MOV, MKV and more. It is read in your browser; nothing goes up until you start.
- 02
Try the first minute
Run one minute on Studio voice and switch between the original and the dry voice while it plays. If the room still rings, you know before paying for more.
- 03
Set the room, then download
Run the whole file, choose how much room to keep and the loudness, then download mono MP3 or WAV, or your MP4 or MOV with the picture kept.
Reverb Remover Example: How Fast a Word Fades
The stairwell sample in the tool, cleaned on our partner studio and measured by us: the level after each word ends.
How fast a word fades, stairwell sample, measured by us
Averaged over ten word endings, a word used to take about 360 ms to fade by 20 dB, so its tail ran into the next word. After Studio voice it falls 20 dB in about 45 ms and keeps falling, while the voice stays at the same level. Play the sample and switch views to hear the reverb remover at work.
Reverb Removal, Explained
What reverb is
Reverb is thousands of reflections arriving so close together that they merge into one fading tail. It is measured as RT60, the time a sound takes to fall by 60 dB: about half a second in a furnished living room, one to two seconds in a lecture hall, longer in a large church.
Reverb or echo?
Echo is a distinct repeat you can pick out, like a slap off a bare wall or a repeat on a call. Reverb is a smooth wash that makes the speaker sound distant. Rooms give you some of each. For slap-back and call echo, the echo remover is the page to read; both run on Studio voice.
Why a gate, EQ or a dereverb plugin only go so far
Classic tools work on the sound you have. A gate shuts the tail between words but leaves it inside them, EQ thins the boom, and a dereverb plugin estimates the tail and subtracts it in an editor, with settings to learn. An AI reverb remover has learned what dry speech sounds like and rebuilds it, so there is nothing to install or tune.
Record with less reverb next time
A drier recording needs less fixing.
- 1Get the mic close: a lapel mic or a phone held near the mouth.
- 2Pick the smallest, softest room you can, away from glass.
- 3Face into the room, not into a bare wall or a corner.
A Private Reverb Remover: Only the Sound Is Uploaded
The file opens in your browser and stays there until you start a run. Then only the sound is sent, never a video’s picture. Results wait 7 days for you to download, and any run can be deleted from your recent recordings.
Reverb Remover FAQ
Price, files, video and what de-reverb can and can’t do.
No, and there is no free reverb remover mode hidden here. The free quick denoiser in your browser turns down steady noise only, such as hum, hiss and fans, and can’t remove reverb. Reverb needs Studio voice, billed by the started minute with the total shown first. Try the first minute; a failed run gives the credits back.
AI. Studio voice has learned what speech sounds like without a room and rebuilds the voice from your recording, instead of turning frequencies down. That is why it can take a tail out from inside words, where a gate can’t reach.
No. It is built for speech: music and backing tracks are removed along with the room, and singing may come out broken. For talks, sermons, podcasts, calls and video dialogue it is the right tool.
No. Open the file in your browser, run it and download. There is no plugin, no host app and no setting to learn, only how much room to keep.
Most of the tail of one speaker in a hall, a gym or a bare office. The voice has to be louder than the room: a speaker far across a church, buried in reverb, comes out thinner. The first minute shows what the reverb remover can do with your file.
Drop the MP4 or MOV into the reverb remover. Only the sound is uploaded; after the run, the video download is the same file with the dry voice and its picture. From MKV, WebM or a fragmented MP4 from some phone and screen recorders you get the audio. Video with noise but little reverb? Remove background noise from video with Clean.
Yes. Studio voice keeps the main speaker and drops noise and other people talking along with the reverb. For noise only, with every voice kept, pick Clean, here or on the background noise remover; for an everyday tidy-up of speech there is the voice cleaner; to keep one voice from a crowd, see the voice isolator.
No: the reverb remover returns mono at 48 kHz, which is how speech is usually published. A stereo recording is mixed to one channel before the run.
It is billed by the started minute at the Studio voice rate, and the total for your file is on the button before you start. The full run leaves out a minute you already tried, and the same file with the same settings is not charged twice. Plans are on the pricing page.
Audio in MP3, WAV, M4A, AAC, FLAC, OGG, Opus or WebM, and video in MP4, MOV, M4V or MKV, up to 30 minutes and 400 MB a file.
MP3 (192 kbps) or WAV (16-bit), 48 kHz mono, at the loudness you pick: podcast -16 LUFS, video -14, audiobook -19, broadcast -23, or as it is. MP4 and MOV can come back as video. Results stay 7 days.
Remove Reverb From Your Recording
Open a talk, a lecture or a video in the reverb remover, try the first minute and get the voice close and dry again. Up to 30 minutes, the price shown before you start.