Setup fixes first, then a free cleanup
How to Make Your Mic Sound Better: Setup and Cleanup
How to make your mic sound better: sit 10 to 15 cm away, speak slightly across it, set the gain so speech peaks near −12 dBFS, and quiet the room. Then clean the take above with AudioCleaner: free in your browser for hiss, hum and fan noise, nothing uploaded; AI for room noise and typing.
- Setup Fixes That Cost Nothing
- Discord, OBS, Windows, Mac
- Free Cleanup, Nothing Uploaded
- AI for Room Noise and Typing
A lecture under the air conditioning
Air conditioner hum · Lecture · Quick denoise
Made noisy on purpose on our partner studio. Quick denoise ran here, with this page's free denoiser; switch to Clean to hear the AI version from our partner studio.
0:00 / 0:00
Quick denoise: the free cleanup in your browser turned the steady noise down and kept the voice.
Below 100% a little of the place comes back, for a natural sound. Free to change.
Playback here is matched to it, so the comparison is fair.
Your files and results are visible only to you; runs are kept 7 days.
Up to 30 min · 400 MB
Cleans recorded files, not a live mic
- mouth to mic, kept steady
- 10 to 15 cm
- about where speech should peak
- −12 dBFS
- speak across it to stop pops
- Off axis
- 24-bit if your setup offers it
- 48 kHz
- test each app voice effect
- One by one
- hiss, hum and fan cleaned here
- Free
How to Make Your Mic Sound Better Before You Record
Six setup fixes that cost nothing. Each one does more than any filter can do afterwards.
How to Make Mic Sound Better After Recording
For what the setup could not stop. The tool above opens on the free mode, which runs in your browser.
- 01
Open the recording
Drop the take or pick a sample: audio or video, up to 30 minutes. Nothing is uploaded in the free mode.
- 02
Pick what you hear
Hiss, hum or a fan point to the free denoise. Room noise or typing point to Clean; echo or other voices to Studio voice. Both AI modes need an account and use credits per minute.
- 03
Compare and download
Switch between Original and Cleaned, then save MP3 or WAV at podcast loudness, with no watermark.
How to Make My Microphone Sound Better: Hear It
Three takes with the problems a home mic picks up: preamp hiss, an air conditioner, and a room that echoes.
A voice-over with hiss from the mic preamp
Gain set too low, then turned up: the hiss came with it. The free mode quiets the pauses and leaves the voice alone.
Our sample: hiss added on purpose to a clean voice, denoised by this page’s free mode.
On the hiss sample, the free mode took the pauses from about −54 dB to −70 dB and left the voice at −16 dB. On the air conditioner, free brought the hum in the pauses from −22 dB to −36 dB and Clean to −73 dB. The echo needs Studio voice.
Mic Settings in Discord, OBS and Your Computer
Check the input level in your system
On Windows, open Settings > System > Sound, pick the mic under Input, open its Properties, use Start test and set Input volume. On a Mac, open System Settings > Sound > Input, select the mic and drag the input volume slider. Speak normally: the meter should move well without staying at the top.
Discord voice settings
Open User Settings > Voice & Video. Under the Voice tab, choose the right Input Device and set Input Volume. If the ends of your sentences get cut, turn off Automatically determine input sensitivity and move the slider just above your room noise. Discord’s own advice for bad audio is to try Noise Suppression, Echo Cancellation and Automatic Gain Control on and off, one at a time.
OBS mic filters
Watch the mic in the Audio Mixer: speech belongs in the upper yellow zone; red means close to clipping. Open the mic source’s Filters and add Noise Suppression (RNNoise is the higher-quality, heavier option) and a Noise Gate with its close threshold above your noise and its open threshold just under your voice. The noise gate page explains the settings.
Record a clean file to work from
For anything you will edit or publish:
- 1Record at 48 kHz, 24-bit if you can; 44.1 kHz is fine for audio only.
- 2Wear closed headphones so you hear what the mic hears.
- 3Leave the app’s voice effects light: several noise removers in a row make a voice sound watery.
- 4Keep the raw take; clean a copy.
Record five seconds of silence before you start. Play it back loud: whatever you hear is what the room adds to every word.
How to Make Mic Sound Better: FAQ
Setup, apps, and cleaning a take you already have.
Move closer (10 to 15 cm), speak slightly across the mic, set the gain so peaks sit near −12 dBFS, and record in the softest room you have. Then run the free denoise above for any hiss, hum or fan noise that is left.
Distance and the room matter more than the price of the mic. A cheap mic close to your mouth in a furnished room usually beats an expensive one across a bare room.
Usually distance, the room, or talking into the wrong side of the mic. Fix the setup first; for a take you already have, try fix muffled audio or the voice enhancer.
In User Settings > Voice & Video, pick the right Input Device, set Input Volume, and turn off automatic input sensitivity if words get cut off. Then test Noise Suppression, Echo Cancellation and Automatic Gain Control one at a time.
Keep speech in the upper yellow zone of the Audio Mixer, then add Noise Suppression and a Noise Gate to the mic source’s Filters. Set the gate’s close threshold above your room noise.
The tool above works as a microphone quality enhancer for a take you already have: free for steady hiss, hum and fans, AI for room noise and typing. For a thin, distant voice, the voice enhancer rebuilds it closer.
There is no single number on the knob. Speak at your normal volume and set it so the loudest words peak around −12 dBFS and never reach 0. A louder laugh then still fits.
If you are close to the mic, yes, or speak across it. A thump from a p is hard to remove after the take; a pop filter or foam cover costs little.
Not the free mode: it only handles steady noise. Studio voice in the tool above rebuilds the voice without the room, and the echo remover is built for it.
It sits on the desk you type on, or too far from your mouth so the gain is high. Put it on an arm, closer to you. For keys already in a take, use Clean, or see mic noise reduction.
48 kHz is the safe choice, and the standard for video; 44.1 kHz is fine for audio only. Use 24-bit if your interface offers it for more headroom.
Not in the free mode: it runs in your browser. Clean and Studio voice send only the sound, never a video’s picture, and keep the result for you for 7 days.
How to Make Your Mic Sound Better Today
Fix the setup, record, then drop the take above: free cleanup for hiss, hum and fans in your browser, AI for the rest. Episodes go out at podcast loudness with the podcast enhancer.