Essential Sound, DeNoise, Enhance Speech
Premiere Pro Noise Reduction, Step by Step
Premiere Pro noise reduction has three tools: Reduce Noise in Essential Sound, the DeNoise effect and AI Enhance Speech, with steps below. Or let AudioCleaner clean the clip before import: only the sound is processed, and the MP4 comes back with its picture.
- Steps From Adobe’s Help Pages
- Reduce Noise, DeNoise, Enhance Speech
- Or Clean It Before Import
- Picture Never Uploaded
- Free Quick Denoise
A travel vlog on a windy ferry deck
Wind and engine · Video · Clean
A photo with a slow zoom, made into an MP4 with the noisy sound; the sound was cleaned on our partner studio. Download video rebuilds this MP4 with the cleaned sound, in your browser.
0:00 / 0:00
Cleaned: AI Clean took the noise out and kept the voice as it was.
Below 100% a little of the place comes back, for a natural sound. Free to change.
Playback here is matched to it, so the comparison is fair.
Your files and results are visible only to you; runs are kept 7 days.
MP4 · MOV keep the picture
- Reduce Noise, DeNoise, Enhance Speech
- 3 tools
- the Reduce Noise slider
- 0 to 10
- the DeNoise amount
- 0 to 100%
- how much Enhance Speech is used
- Mix Amount
- clean before import, MP4 back
- Picture kept
- quick denoise in your browser
- Free
How to Remove Background Noise in Premiere Pro
To remove background noise in Premiere Pro, the Essential Sound way is the quickest of the three tools. The steps follow Adobe’s help pages.
- 01
Open Essential Sound
Choose Window > Essential Sound, select the clip in the timeline and set its type to Dialogue. The repair options only appear for dialogue clips.
- 02
Turn on Reduce Noise
Tick Repair, expand it, tick Reduce Noise and set the slider between 0 and 10. Start low and raise it while the clip plays.
- 03
Check it and match the level
Listen to the pauses and the words. Taking noise out makes a clip a little quieter, so bring the level back up, for example with Auto Match under Unify Loudness.
Premiere Pro Noise Reduction Tools, One by One
Where each one lives, what it controls, and when it is the right one.
Example: A Windy How-to, Cleaned Before Import
The how-to sample in the tool above: a speaker filmed outdoors in wind and traffic, cleaned with Clean before it goes into an editor.
A how-to filmed in the wind
Gusts and passing cars right under the words. Clean takes them out before the clip reaches an editor.
Our sample: made noisy on purpose and cleaned on our partner studio.
Across the clip the pauses fall from about -13 dB to about -55 dB, and the voice stays at about -11 to -12 dB. The gusts sit right under the words; the Removed track holds the wind and the traffic on their own, so you can hear what went before you import.
Premiere Pro Noise Reduction Tips
Start low, listen in context
Premiere noise reduction, like any other, thins the voice when pushed too far. Raise Reduce Noise one step at a time with the music and the other tracks playing, and stop as soon as the noise stops bothering you. Adobe’s help puts it the same way: the right amount depends on the noise and on how much loss in quality you accept.
Hum and rumble have their own sliders
Mains hum sits at 50 or 60 Hz with harmonics above it: DeHum, or the DeHummer effect, targets exactly that. Very low rumble under 80 Hz, such as a turntable motor or an action camera, is what Reduce Rumble is for. Fix those first and Reduce Noise has less to do.
What Enhance Speech is not for
Adobe lists overlapping speakers, loud background music, whispers, singing and very poor recordings as cases where it does not always work well, and notes that phones with beamforming mics can confuse it. A stereo clip comes back as a mono mix. Use Mix Amount to bring some of the original back.
When to clean before you edit
Wind, traffic and other people talking change from moment to moment. Cleaning those clips before import keeps the timeline light, and the same files work in any editor. To reduce background noise in Premiere Pro afterwards, a light Reduce Noise is often all that is left. For one voice in a crowd, try the voice isolator first.
Room echo is a separate job: try Reduce Reverb in the same Repair group, or the echo remover for a room that rings.
Premiere Pro Noise Reduction FAQ
Where the tools are, how far to push them, and cleaning before import.
Noise reduction in Premiere Pro sits in three places: Essential Sound (Window > Essential Sound, Dialogue, Repair, Reduce Noise), the Effects panel (Audio Effects > Noise Reduction/Restoration > DeNoise), and Enhance Speech, also in Essential Sound.
Use less of it. For Premiere Pro background noise reduction that still sounds natural, keep Reduce Noise low, fix hum and rumble with their own sliders first, and if you use Enhance Speech, pull Mix Amount back toward the original until the voice sounds natural again.
Reduce Noise lives in Essential Sound and appears for clips tagged Dialogue, on a 0 to 10 slider. DeNoise is an effect you drag onto an audio clip and adjust in Effect Controls, from 0 to 100%.
Adobe says it runs on your computer and needs a connection only to download its files before the first use. It works on mono and stereo clips and gives a mono mix back.
Tick DeHum in Essential Sound’s Repair group, or add the DeHummer effect and set its Frequency to 50 or 60 Hz with a few harmonics. Outside Premiere, remove buzz from audio finds the pitch and the harmonics for you, free.
Set Reduce Noise on one clip, save it as an Essential Sound preset, and apply it to the others; Adobe says presets can be applied to several clips of the same type.
Reduce Noise when the noise is steady and you want fine control; Enhance Speech when a voice from a weak mic needs rebuilding, with Mix Amount to keep some of the original. Try both on the same clip and compare.
Yes: drop it in the tool above. MP4 and MOV come back with the picture and the new sound in sync; MKV, WebM and some phone recordings give the cleaned sound as MP3 or WAV, which you can line up under the clip in Premiere.
The picture never is. Quick denoise uploads nothing at all; Clean and Studio voice send only the sound and keep the result for you for 7 days.
It turns down steady noise such as hum, hiss and fans in your browser, with no account and no watermark, and still gives an MP4 or MOV back. Wind, traffic and voices need Clean or Studio voice, which use a few credits a minute.
Yes: how to remove background noise from video covers iPhone, iMovie, CapCut, DaVinci Resolve and Final Cut Pro, and Audacity noise reduction covers the free audio editor.
You can always go back. Essential Sound changes show up as effects on the clip, which you can change or switch off at any time; switching off Enhance Speech plays the original again, Adobe says.
Premiere Pro Noise Reduction, or Clean It First
Drop a clip above and get the same MP4 or MOV back with clear sound, ready for your timeline. Free quick denoise, AI for wind, traffic and voices.