ITU-R BS.1770-4 and EBU R 128 readings
Free LUFS Meter for Audio and Video Files
AudioCleaner is a free LUFS meter for files: integrated loudness, short-term and momentary maximums, loudness range and true peak, measured after ITU-R BS.1770-4 and EBU R 128, with a loudness graph and a check against streaming, podcast and broadcast targets. Up to 20 files; nothing is uploaded.
- Free, Nothing Uploaded
- Integrated, LRA, True Peak
- Checked Against 7 Targets
- Up to 20 Files
Drop audio or video files to measure
MP3, WAV, M4A, FLAC, OGG, MP4, MOV, WEBM · up to 20 files, 30 minutes and 400 MB each. Processed in your browser; nothing is uploaded.
Runs in your browser. Files never leave your device.
Up to 30 min · 400 MB
- gated loudness, as in EBU R 128
- BS.1770-4
- oversampled true peak
- 4x
- each marked official or common
- 7 targets
- at once, audio or video
- 20 files
- no sign-up, no watermark
- Free
- nothing uploaded
- On device
What the LUFS Meter Shows
Every reading a delivery spec asks for, on one card: LUFS metering for files, then what to do about it.
Who Runs a LUFS Check
Anyone who has to hit a number before a file goes out.

Musicians Before a Release
See what streaming will do to a master before you upload it.

Podcasters Before Publishing
Confirm each episode sits near −16 LUFS with the peak under −1 dB.

Editors Delivering Video
Check the mix against EBU R 128 or ATSC A/85 before it goes to broadcast.
How to Use the LUFS Meter in 3 Steps
No account and no upload. Readings appear a moment after you drop the file.
- 01
Drop one or more files
Audio or video, up to 20 files of 30 minutes and 400 MB each. It opens on a demo podcast, so you can see a reading first.
- 02
Read the card
Integrated loudness, range, true peak and the graph, then the targets table: on target, louder or quieter.
- 03
Normalize or copy
Normalize to a target on the same page, or copy the numbers for your notes.
LUFS Meter Readings of Three Demo Files
The meter demos from the tool: press play to hear each file as the playhead moves along its loudness curve.
A podcast mixed to −16 LUFS
On target for Apple Podcasts, the true peak 0.6 dB under the limit.
Demo: a clean voice recording whose level we changed on purpose. Press play to hear the file the readings come from.
Preview plays at half volume.
The podcast reads −16.0 LUFS with a true peak of −1.6 dBTP: on target for Apple Podcasts. The uneven interview reads −19.0 LUFS with a 12.3 LU range, because one voice is 11 dB quieter. The hot voice-over reads −10.1 LUFS, but its true peak of +1.9 dBTP and 872 clipped spots tell the real story.
A Free LUFS Checker That Keeps Files Private
Nothing uploaded
Files are measured in your browser and never leave your device, unreleased masters included.
Free, no sign-up
A LUFS meter online with no account, no credits and no limit on how many files you check.
Built on ITU-R BS.1770-4
A LUFS analyzer with K-weighting, both gates and 4x true peak, checked against EBU test signals. Not a certified broadcast meter.
What Is LUFS? A Short Guide to Loudness Metering
What LUFS stands for
LUFS means Loudness Units relative to Full Scale. It measures how loud audio sounds, not how high its peaks reach: the signal is weighted the way the ear hears (ITU-R BS.1770) and quiet gaps are gated out. One LU is a 1 dB change, and LKFS, the name used in the ATSC standard, is the same unit.
Integrated, short-term, momentary and range
A loudness meter gives four numbers, each over a different window:
- 1Integrated: the whole file, gated, the number targets refer to.
- 2Short-term: a 3 s window, the curve on the graph.
- 3Momentary: a 400 ms window, the quick ups and downs.
- 4Loudness range (LRA): how far quiet and loud passages are apart, in LU.
LUFS vs dB, RMS and true peak
dBFS readings describe sample levels: a sample peak is the highest sample, RMS the average power. LUFS adds the ear’s weighting and the gates, so speech and music compare fairly. True peak estimates the peaks between samples; keep it under −1 dBTP for most targets. Clipped spots need repair, not a new level: see fix clipped audio.
LUFS for Spotify, YouTube, podcasts and broadcast
The targets in the meter’s table, with their sources:
- 1Spotify: plays music at −14 LUFS and asks for masters under −1 dBTP; the Loud setting is −11 (Spotify for Artists).
- 2YouTube: no published figure; −14 is the value commonly used.
- 3Apple Podcasts: around −16 LKFS, ±1 dB, true peak under −1 dB. A mono podcast commonly uses −19 LUFS.
- 4EBU R 128: −23 LUFS, true peak under −1 dBTP. ATSC A/85: −24 LKFS, true peak −2 dBTP.
ATSC A/85 measures long programmes with dialogue gating; this meter reads the full mix, so a long programme can read a little differently in an A/85 tool.
LUFS Meter FAQ
Free use, what the numbers mean, streaming targets and files.
Yes: no sign-up, no credits and no limit on files. Use the LUFS meter free in any current browser; nothing is uploaded.
Loudness Units relative to Full Scale: a measure of how loud audio sounds over time, weighted like the ear and gated so silence doesn’t count.
Spotify publishes −14 LUFS: louder tracks are turned down to it on the Normal setting, and masters should stay under −1 dBTP. The meter estimates how Spotify LUFS rules would treat your file: turned down, or lifted only as far as its peaks allow.
YouTube doesn’t publish a figure. For LUFS for YouTube, −14 with peaks under −1 dBTP is the value commonly used, the same as LUFS for streaming music.
It depends on where the master goes. How many LUFS should my master be for streaming? Around −14 integrated with the true peak under −1 dBTP matches Spotify’s published level. Louder masters are simply turned down there, so pushing past it buys little.
A dB is a ratio; dBFS is a level against full scale, for a sample or an average. A loudness reading is in LU. From LUFS to dB, a change of 1 LU is a change of 1 dB, so a file 3 LU under target needs 3 dB of gain.
The same unit with two names: LKFS is the ATSC term, LUFS the EBU one. The meter labels each target with the name its standard uses.
For loudness, LUFS. RMS is shown too, but it has no ear weighting and no gate, so bass and silence skew it. Every streaming and broadcast target is set in loudness units.
No. It measures files in your browser; it isn’t a LUFS meter plugin and doesn’t meter live input. Bounce your mix and drop the file here for a LUFS test of the result.
Yes, in effect: the targets table shows how many LU each target is away, and Normalize applies that gain for you with the peak held. To add a set number of dB instead, use the volume booster.
Yes. The sound of MP4, MOV, MKV or WebM files is measured. Stereo is measured as stereo; files with more channels are folded to stereo, and the reading is marked approximate.
No. The meter reads and measures each file in your browser; nothing leaves your device.
Measure Your File With the Free LUFS Meter
Drop a file and read its loudness, range and true peak against every common target in seconds, free and private, as a LUFS checker for podcast loudness and music alike.